Every day you go without a Vortex Valve™ is throwing money away.
Chevy Cavalier 2002 Vortex Valve™ Installation
2002 CHEVY CAVALIER 2.2L L4 TESTED UNDER SOME OF THE MOST GRUELING DRIVING CONDITIONS THERE ARE. L.A. FREEWAYS. NOT ONE, BUT 5. FROM THE PACIFIC OCEAN TO DISNEYLAND.
2002 CHEVY CAVALIER 2.2L L4 TESTED UNDER SOME OF THE MOST GRUELING DRIVING CONDITIONS THERE ARE. L.A. FREEWAYS. NOT ONE, BUT 5. FROM THE PACIFIC OCEAN TO DISNEYLAND.
UNDER 5 MINUTE INSTALL ON A CHEVY CAVALIER 2002
Increased Mileage 22%
Big Power
Only $69.95 US
Installing a Vortex Valve™ on your Chevy Cavalier 2002 is as easy as 1,2,3.
Step 1
Make sure the engine is off. Always wear gloves when working on machinery that is not running. We have to remove the air box that has 2200 on it. Following are the steps and a few things we found out.
Use a slot screwdriver to loosen the clamp on the air intake duct where it meets the air box with 2200 on it. Like the picture at the right.
When you pull the Air Intake Duct off the 2200 air box this is what it looks like. At least in California.
You have to disconnect this little vacuum line from the 2200 air box.
Remove a 10mm bolt on the 2200 air box, it's on the left hand side, more to the front. After you have removed the bolt, put it in a safe place, grab the box firmly, with both hands, and move it from side to side while gently pulling up.
Here's what you get. The 2200 air box.
Step 2
This is what you see when you look over the backside of the engine. The throat of the throttle body. Install the Vortex Valve™inside the throat of the throttle body, like the picture at the right.
Step 3
Slide the 2200 air box back over the Vortex Valve™and the throttle body. Press down and move from side to side until the unit is seated. Replace the 10 mm bolt and the vacuum hose. Reconnect the Air Intake Duct and tighten the clamp. You are ready for the open road or wall-to-wall traffic with plenty of power and response and great mileage too.
Guarantee
Your Vortex Valve(s)™ will be on its way to you within 7 working days. There are a few special applications and these may take a week or two longer. Your Vortex Valve™ is 100% guaranteed against any defects in workmanship and materials. Your Vortex Valve™ is made in the USA with high quality stainless steel that's made here too.
Air Synergy Labs, Inc offers a Lifetime replacement guarantee on workmanship and any manufacturer defects as long as you own the vehicle on which it is installed.