Every day you go without a Vortex Valve™ is throwing money away.

INSTALLING A VORTEX VALVE™ ON A CLASS 8 MOTOR WITH A METAL PIPE FROM THE INTERCOOLER CONNECTED TO THE MANIFOLD WITH A NEOPRENE BOOT.

7/16 DEEP WELL SOCKET.

LOOSEN THE TOP SPRING CLAMP. A FLAT HEAD SCREWDRIVER IS HANDY TO BREAK THE BOOT LOOSE. REMOVE THE PIPE FROM THE BOOT LIKE THE PICTURE ABOVE.

SPREAD THE VORTEX VALVE™ ABOUT 1 INCH AT THE JOINT. COLLAPSE IT INTO THE METAL TUBE WITH THE VANES (FINS) POINTING INTO THE TUBE. PUSH IT BACK INTO THE TUBE UNTIL IT IS FLUSH WITH THE END OF THE TUBE. INSERT IT INTO THE BOOT AND PUSH UNTIL IT MAKES CONTACT WITH THE FIRST RIB IN THE BOOT. TIGHTEN THE CLAMP. YOU ARE GOOD TO GO. CUSTOMER SERVICE 1-800-417-3270

See our other Class 8 Installations

© 2006 AIR SYNERGY LABS, INC.
1525 EAST SUNSET ROAD SUITE 1 LAS VEGAS NV 702-951-6666